Surveying

Surveying is the science and art of using applied mathematics to determine the area of any portion of the earth's surface, the length and direction of the bounding lines, and the elevation contours of the surface. GeoMetrics provides traditional survey services to the community. Our experienced and highly trained staff completes Boundary Surveys, Topographic and Hydrographic Surveys, Hazardous Waste and Environmental Surveys, and Route and Construction Surveys.

BOUNDARY SURVEYS
TOPOGRAPHIC / HYDROGRAPHIC SURVEYS
HAZARDOUS WASTE / ENVIRONMENTAL SURVEYS
ROUTE / CONSTRUCTION SURVEYS

BOUNDARY SURVEYS

GeoMetrics GPS, Inc. performs legal boundary surveys for both large and small acreage. Our staff is experienced in both Public Lands (PLSS) and Colonial (metes and bounds) resurveys. We use technology as a tool to assist in the recovery of evidence for boundary location. Our staff is licensed to perform boundary surveys in Virginia, Ohio, Pennsylvania, Alabama, Mississippi, Louisiana, and Texas.

b1

TOPOGRAPHIC / HYDROGRAPHIC SURVEYS

b2GeoMetrics performs topographic surveys using both GPS and conventional terrestrial total stations. All features and elevations are collected digitally in the field. The topographic maps are produced in Autocad Release 14 (DWG) and Microstation 95 (DGN) formats.

GeoMetrics performs hydrographic surveys using GPS as a primary positioning system. The GPS is coupled with a digital fathometer to collect the depth of the water. The depth is collected each second in a regular pattern and stored with a GPS position and time tag. The depths are corrected for the draft of the boat, tidal variation, river stage, and speed of sound in water. The depths are subtracted from the surface elevation to produce elevations on the bottb3om of the survey area. The elevations are then used to produce a bathymetric contour map.

HAZARDOUS WASTE / ENVIRONMENTAL SURVEYS

We have surveyed radiation, explosive ordnances, and chemical contamination. Our GPS equipment interfaces with a variety of sensory instrumentation to enable cost effective data capture. All our field personnel have completed the 40 hour Hazardous Waste Training as per OSHA 29CFR1910.120. Our experience has been gained on projects throughout the United States.

b4Radiation Surveys: Radiation Gamma Walkover Surveys (GWS) are performed to measure the quantity of radionucliides present in an area of concern (AOC). The long term exposure to concentrations of these particles is a health hazard. GeoMetrics uses a ratemeter/scaler with various detectors to measure both high energy and low energy particles. All of the data is collected digitally and merged with the GPS position. The data is processed using our proprietary software and spatially analyzed in a Geographic Information System (GIS). Past projects include EPA Superfund sites and DOE/COE FUSRAP sites.

Explosive Ordnance: GeoMetrics GPS, Inc. performed a number of surveys in support of the detection and removal of b5explosive ordnance. Our trained hazardous waste surveyors work closely with Explosive Ordnance Demolition (EOD) technicians. Our GPS equipment interfaces with a variety of sensors including magnetometers such as the EM-61, ground penetrating radar, fathometers, and side scan sonars. We work closely with the Naval Research Laboratory (NRL) on many projects.

Past projects include surveying the minefields of Kuwait after the 1991 Gulf War, and surveys at locations such as Fort Ritchie, Aberdeen Proving Ground, San Dia National Laboratory, Ogala Sioux Bombing Range, and Fort Pierce.

Environmental Site Characterization/Location Surveys: b6GeoMetrics uses GPS and conventional survey technology to locate monitoring wells, soil bores, test pits and grid locations at other hazardous waste or environmentally concerned sites. Past projects include Bainbridge Naval Training Center, Griffis AFB, Beltsville Agricultural Research Center, and Crab Orchard National Wildlife Refuge.

ROUTE / CONSTRUCTION SURVEYS

b7GeoMetrics GPS, Inc. uses its expertise with GPS technology to provide real time kinematic (RTK) stakeout for construction stakeout, mining and stockpile inventories, and location surveys. Our dual frequency GPS equipment is capable of centimeter level accuracy in real time. The system consists of a GPS base station and a GPS rover connected via a high power radio modem. RTK stakeout is very cost effective as it is unaffected by weather and because an unlimited number of GPS rover units can operate from the same GPS base.

 
bottnav

GeoMetrics GPS, Inc.
236 Cambridge Street
Fredericksburg, VA 22405
(540) 372-3499
(540) 371-5703 fax
 



© 1997 Site Created By StarWeb